Brass C360 is a dream material for CNC milling. It machines at extremely high speeds with excellent chip formation, minimal tool wear, and superb surface finish. It is the benchmark for machinability.
| Parameter | Value |
|---|---|
| Achievable Tolerances | ±0.005 mm (±0.0002") |
| Surface Finish | Ra 0.2-0.8 μm |
| Cutting Speed | 200-500 m/min (SFM 650-1650) |
| Feed Rate | 0.08-0.20 mm/tooth |
| Tooling Recommendations | Carbide or HSS end mills, 2-3 flutes. Uncoated tools work well. PCD for ultra-high volume. |
Can use very high spindle speeds
Sharp tools produce mirror-like finishes
Dry machining possible for light cuts
Chips break cleanly — easy to manage
Multiple parts from one setup for efficiency
Fittings and adapters
Valve bodies
Electrical connectors
Decorative hardware
Plumbing components
Get a detailed quote with DFM feedback for your CNC project. Free quotes within 24 hours.
Get a Free Quote